{"title":"Land Cruiser Prado 120 Series | Coil Springs","description":"","products":[{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-to-2009-front-coil-spring-raised-height-0-5-110lb-without-kdss-ttcs-1777","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Front Coil Spring Raised Height 0.5\" 110lb Without KDSS (TTCS-1777)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(\u003cspan\u003eTTCS-1777)\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50843648000164,"sku":"TTCS-1777","price":370.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/1_76616d0c-c02b-49a4-98c8-d80a460dd128.gif?v=1742396209"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-front-coil-spring-raised-height-1-5-220lb-without-kds-ttcs-1696","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Front Coil Spring Raised Height 1.5\" 220lb+ Without KDS (TTCS-1696)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(TTCS-1696)\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50843665989796,"sku":"TTCS-1696","price":370.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/1_5831b8a0-6acd-4123-9ba6-c7be816389db.gif?v=1742397077"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-front-coil-spring-raised-height-1-5-110lb-220lb-without-kdss-ttcs-2303t","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Front Coil Spring Raised Height 1.5\" 110lb-220lb Without KDSS (TTCS-2303T)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(TTCS-2303T)\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50843674116260,"sku":"TTCS-2303T","price":441.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/1_ceea6003-4c82-488c-8f3f-74bc6f3cf698.gif?v=1742397461"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-front-coil-spring-raised-height-1-5-220lb-without-kdss","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Front Coil Spring Raised Height 1.5\" 220lb Without KDSS (TTCS-2304T)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e(\u003c\/span\u003e\u003cspan id=\"sku-3157\" class=\"value\"\u003eTTCS-2304T)\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50843683094692,"sku":"TTCS-2304T","price":441.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/1_1b6bf809-92f2-49f3-85a5-c780403d957b.gif?v=1742398006"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-front-coil-spring-raised-height-1-5-220lb-heavy-duty-without-kdss-tapered-wire-ttcs-2412t","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Front Coil Spring Raised Height 1.5\" 220lb+ Heavy Duty Without KDSS Tapered Wire (TTCS-2412T)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(TTCS-2412T)\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50843689877668,"sku":"TTCS-2412T","price":441.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/1_1659934e-4089-4244-9bd9-094988df5f44.gif?v=1742398542"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-rear-coil-spring-raised-height-0-5-110lb-without-kdss-ttcs-1697","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Rear Coil Spring Raised Height 0.5\" 110lb Without KDSS (TTCS-1697)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(\u003cspan\u003eTTCS-1697)\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50848726352036,"sku":"TTCS-1697","price":370.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/TT-Coil-Springs-anim_3d36a440-24af-4f7f-83a5-0f579432d9c4.gif?v=1742601164"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-rear-coil-spring-raised-height-1-5-220lb-heavy-duty-with-without-kdss-ttcs-1698","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Rear Coil Spring Raised Height 1.5\" 220lb Heavy Duty With \u0026 Without KDSS (TTCS-1698)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e(\u003cspan class=\"value\" id=\"sku-3099\"\u003eTTCS-1698)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50848750534820,"sku":"TTCS-1698","price":370.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/TT-Coil-Springs-anim_2dc161e2-6d8c-4514-9362-35939ca031d3.gif?v=1742601656"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-rear-coil-spring-raised-height-1-5-220lb-550lb-progressive-rate-with-without-kdss-ttcs-2343","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Rear Coil Spring Raised Height 1.5\" 220lb-550lb Progressive Rate With \u0026 Without KDSS (TTCS-2343)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2010-\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e(TTCS-2343)\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50848771080356,"sku":"TTCS-2343","price":370.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/TT-Coil-Springs-anim_98d31450-417d-4d48-ac6f-fe056c1040b9.gif?v=1742602031"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-rear-coil-spring-raised-height-1-5-220lb-660lb-with-without-kdss-ttcs-1699","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Rear Coil Spring Raised Height 1.5\" 220lb-660lb With \u0026 Without KDSS (TTCS-1699)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e(TTCS-1699)\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50848800145572,"sku":"TTCS-1699","price":370.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/TT-Coil-Springs-anim_f14c7ff9-7881-4a97-bd44-3d8276a6de14.gif?v=1742602455"},{"product_id":"terrain-tamer-land-cruiser-prado-120-series-from-9-2002-4runner-4th-gen-grn-kdn-trn-uzn-vzn215-2003-2009-rear-coil-spring-raised-height-1-5-600lb-1-100-00lb-extra-heavy-duty-ttcs-2365","title":"TERRAIN TAMER | Land Cruiser Prado 120 Series From 9\/2002 \u0026 4Runner 4th Gen GRN \u0026 KDN \u0026 TRN \u0026 UZN \u0026 VZN215 2003-2009 Rear Coil Spring Raised Height 1.5\" 600lb-1,100.00lb Extra Heavy Duty (TTCS-2365)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eAustralian made, TERRAIN TAMER SMART COILS are designed to reduce rebound forces travelling through the coil spring. This unique design with a tapered wire is made for front coil springs only.\u003c\/p\u003e\n\u003cp\u003eAs the driver turns or changes lanes, the progressive Smart Coil increases driver control and reduces wear on the suspension system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralian made\u003c\/li\u003e\n\u003cli\u003eTapered wire design\u003c\/li\u003e\n\u003cli\u003eReduces the vehicle’s body roll\u003c\/li\u003e\n\u003cli\u003eMade from X5K Spring Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer, a renowned four-wheel drive parts supplier, has been delivering quality engineered products to its customers for the last 50 years. The company's commitment to quality has made it one of the most trusted brands among off-road enthusiasts. Recently, the company installed its progressive rate \u003c\/span\u003esmart coil springs\u003cspan\u003e into the front of a 105 series Land Cruiser, which resulted in a significant improvement in the vehicle's handling. In this blog, we will uncover the process of how Terrain Tamer creates its coil springs, and why it makes a difference in the performance of a four-wheel drive vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe process of making Terrain Tamer coil springs starts with high-stress spring steel. The x5k high-stress spring steel comes in rolls weighing over a ton and gets fed onto a big drum. Using expensive high-quality steel may seem like an unnecessary expense, but the benefits outweigh the cost. By using higher quality steel, the company needs less steel for its coil springs, which means there's more space for the material to move around. This avoids a situation where coil binds happens, a common problem in four-wheel drive vehicles when the suspension goes into full compression.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the steel is rolled into the right shape, it's time for quality control. The bar peeling machine is where the bar gets peeled, removing a half millimetre off the outside diameter of the spring steel. This machine is not just about removing impurities from the steel; it's also about making sure that the bar is free from any stress risers. Stress risers can occur due to the minute nicks and damage to the bar that occurs during transportation and handling. If not dealt with, these nicks can cause the metal to break and fatigue. The machine also tapers the bar according to the company's specifications, making it easier to work with.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe final stage is where the coil spring gets produced. Terrain Tamer's progressive rate coil springs are made by taking two coil springs and mashing them together into one. This process gives the vehicle a fantastic ride that the Land Cruiser owner experienced. By using high-quality steel and removing any stress risers, the coil spring performs better, and the vehicle handles better. Additionally, using this process means that Terrain Tamer can deliver a more efficient product to its customers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTerrain Tamer has been keeping its 50-year-old promise to deliver quality engineered four-wheel drive parts. The company's commitment to using high-quality materials and implementing strict quality control measures means that its customers get a product that performs better and lasts longer. The company's progressive rate coil springs are a perfect example of how engineering can make a difference in a vehicle's performance. If you're looking for quality engineered parts for your four-wheel drive vehicle, you can't go wrong with Terrain Tamer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eQuantity Required: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDate: 2003-2009\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1 Pair\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e(TTCS-2365)\u003c\/span\u003e\u003c\/p\u003e","brand":"Terrain Tamer","offers":[{"title":"Default Title","offer_id":50848840876196,"sku":"TTCS-2365","price":487.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0423\/0820\/6756\/files\/TT-Coil-Springs-anim_1f310ed6-9e9d-44cd-8254-4bdf422cbb4f.gif?v=1742603054"}],"url":"https:\/\/evergreenoffroad.com\/collections\/land-cruiser-prado-120-series-coil-springs.oembed","provider":"Evergreen Offroad","version":"1.0","type":"link"}